12V 5A Professional 8 steps full automatic Car Battery Charger, CE RoHS FCC marked, IP65

Model Number: KRE-C9005 Brand Name: KRECOBILLY Key Specifications/Special Features: 12V 5A 8 stepsfull automatic Battery Charger,Professional Lead-acid Battery Charger. Smart High-Frequency Charger, present the latest Technology of Battery Charger industry. CE RoHS FCC marked!Model Nunber:KRE-C9005PCB design number: XJD-C9005General:12V 5A series8 stepsfull automaticLead-acid Battery Charger.Charging Progarm:

• Step 1 DESULPHATION
• Detects sulphated batteries. Pulsing current and voltage, removes sulphate from thelead plates of the battery restoring the battery capacity.
• Step 2 SOFT START
• Tests if the battery can accept charge. This step prevents that charging proceedswith a defect battery.
• Step 3 BULK
• Charging with maximum current until approximately 80% battery capacity.
• Step 4 ABSORPTION
• Charging with maximum current to maximize up to 100% battery capacity.
• Step 5 ANALYSE
• Tests if the battery can hold charge. Batteries that can not hold charge may need tobe relaced.
• Step 6 RECOND
• Choose the Recond program to add the Recond step to the charging process. During theRecond step voltage increases to crete controlled gasing in the battery. Gasing mixesthe battery acid and gives back energy to the battery.
• Step 7 FLOAT
• Maintaining the battery voltage at maximum level by providing a constant voltagecharge.
• Step 8 PULSE
• Maintaining the battery at 95-100% capacity. The charger monitors the battery voltageand gives a pulse when necessary to keep the battery fully charged.

Charging separated lead-acid battery:

• connect Red clamp or eyelet to Pos pole of battery("+"). Black clamp or eyelet to Neg pole of battery("-");
• Insert mains plug into AC source socket;
• For disconnection, first of all pull out the mains plug from AC source socket, then disconnect the clamps or eyelet from battery pole.

Charging vehicle-mounted lead-acid battery:

• Connect the red clamp to the Pos pole of battery, black clamp to the vehicle chassis and keep away from fuel pipe and battery(If battery's Pos pole grounded, then connect black clamp to Neg pole, red clamp to vehicle chassis and keep away from fuel pipe and battery);
• Insert mains plug into AC source socket;
• Before disconnection, first of all pull out the mains plug from AC source socket;
• Then disconnect black clamp before red clamp.(If battery's Pos pole grounded, then disconnect red clamp before black clamp)